Construction, Infrastructure & Building Products

FRP CONSTRUCTION AND INFRASTRUCTURE APPLICATIONS

For Fabricated FRP Products Used in Building and Industrial Environments

FRP materials are used in building and infrastructure products where low weight, corrosion resistance, practical fabrication and repeatable production are important. The correct reinforcement format depends on the product design, moulding process, resin system and required performance.

Brahma Technical Textiles supports material discussions for fabricated FRP products where woven rovings, woven roving tapes and CSM may be required.

Common Fabrication Challenges & Our Support

Consistent Material Supply

Manufacturers need the same GSM, width and roll condition for repeat production.

Understand Your Product

Share the product you are manufacturing, process used and required material format.

Correct Reinforcement Format

Different products may need full-width woven fabric, narrow tapes or CSM.

Suggest a Suitable Material Format

We help identify whether woven roving, woven roving tape or CSM may suit your requirement.

Handling and Material Waste

Wrong fabric width, damaged edges or poor roll packing can create cutting waste and production problems.

Provide Clear Product Information

We share product code, GSM, width, roll format and technical information for the selected grade.

Product-Specific Material Planning

Panel type, resin system, moulding process, thickness and service condition must be considered before final material selection.

Support Repeat Supply Planning

Once the material is approved, we can discuss repeat supply, packing and delivery requirements.

PRODUCT FORMAT GUIDE

Select the Reinforcement Format Based on Your Product

Glass Fibre Woven Rovings

May be suitable for broad laminate reinforcement in FRP panels, covers, cladding components and larger fabricated products where balanced woven fabric is specified.

View Woven Rovings

Glass Fibre Woven Roving Tapes

May be suitable where narrow-width reinforcement is required around edges, joints, corners, overlap areas and selected local laminate sections.

View Woven Roving Tapes

Chopped Strand Mat

May be suitable for non-woven reinforcement layers and laminate build-up where the approved binder type, resin system and fabrication process are compatible.

View Chopped Strand Mat

START WITH YOUR PRODUCT REQUIREMENT

Discuss Your FRP Building Product Requirement

Share your product type, fabrication process, resin system, required material format and quantity. We will discuss a suitable woven roving, woven roving tape or CSM supply option.

Discuss Your Requirement Request a Quote

EXPLORE MORE